Comments for ElectronixBlog http://km5z.us/blog An occasional posting of electronic projects. Mon, 06 Feb 2012 14:41:34 +0000 hourly 1 http://wordpress.org/?v=3.3 Comment on IG-102 FET Version – Tinkering with Tubes by Mike http://km5z.us/blog/?p=4#comment-111 Mike Mon, 06 Feb 2012 14:41:34 +0000 http://km5z.us/blog/?p=4#comment-111 You're welcome. The mod is from an old, old paperback book collection of test gear projects. Best of all, it's not permanent. It doesn't really change anything in the circuit. If you want, you can unsolder the FETs and go back to vacuum tubes. You’re welcome. The mod is from an old, old paperback book collection of test gear projects.
Best of all, it’s not permanent. It doesn’t really change anything in the circuit. If you want, you can unsolder the FETs and go back to vacuum tubes.

]]> Comment on IG-102 FET Version – Tinkering with Tubes by Fred King http://km5z.us/blog/?p=4#comment-110 Fred King Sat, 04 Feb 2012 11:38:12 +0000 http://km5z.us/blog/?p=4#comment-110 I just got an IG-102 and am going to do this mod. Thanks for posting it. I just got an IG-102 and am going to do this mod.
Thanks for posting it.

]]> Comment on “Most Accurate” SB-630 Update by SB-630 Console Clock | ElectronixBlog http://km5z.us/blog/?p=23#comment-97 SB-630 Console Clock | ElectronixBlog Tue, 20 Dec 2011 20:03:51 +0000 http://km5z.us/blog/?p=23#comment-97 [...] I updated the project with a clock that receives WWVB signals. This entry was posted in Ham Radio, Heathkit, Repair by Mike. Bookmark the [...] [...] I updated the project with a clock that receives WWVB signals. This entry was posted in Ham Radio, Heathkit, Repair by Mike. Bookmark the [...]

]]> Comment on Repairing VTVM Pilot Light by Yet another Part 15, AM Transmitter | ElectronixBlog http://km5z.us/blog/?p=98#comment-96 Yet another Part 15, AM Transmitter | ElectronixBlog Tue, 20 Dec 2011 19:56:46 +0000 http://km5z.us/blog/?p=98#comment-96 [...] Revisited the original 6888 version which has already been updated with a 6AB4 pre-amp, and shielded all the signal paths (audio and [...] [...] Revisited the original 6888 version which has already been updated with a 6AB4 pre-amp, and shielded all the signal paths (audio and [...]

]]>